Performance drop

These are problems that have already been resolved, either by others or by their users.

Moderator: Graf Zahl

Locked
drako
Posts: 18
Joined: Wed Aug 10, 2016 19:28

Performance drop

Post by drako »

1. I use treetest.pk3 to test performance. (The trees which are only behind a slightly lower wall make gzdoom "suffer".) treetest.pk3 file https://zandronum.com/tracker/file_down ... 4&type=bug , https://zandronum.com/tracker/view.php?id=1541 .

2. The last build which runs on my machine is 1905 (July 30, 2016) (see: http://forum.drdteam.org/viewtopic.php?f=25&t=7072 for details). This build gives me 16 fps when I look in the direction of trees and 500 fps when I look in the opposite direction. When I run this build with the parameter +gl_renderbuffers 0 the performance is the SAME (ie 16/500).

3. Builds from 1958 (Aug 06,2016) to 2025 (Aug 19, 2016) run only when I pass the parameter +gl_renderbuffers 0 . The performance then is 5 / 225 (more than 3 time slower than in the previous case. It cannot be due to +gl_renderbuffers 0 parameter because I also passed that parameter in the previous case - see point 2)

4. Builds from 2052 (Aug 21,2016) to 2090 (Aug 27, 2016) do not run at all (again, see: http://forum.drdteam.org/viewtopic.php?f=25&t=7072 for details)

5. Build 2099 (Aug 28, 2016) runs only when I pass the parameter +gl_renderbuffers 0 . The performance then is also 5 / 225

Why is the build 1905 better in performance than later builds when the parameter +gl_renderbuffers 0 is passed? It seems to me that either build 1905 ignores that parameter or one of the commits between July 30, 2016 and August 06, 2016 causes that performance drop.
dpJudas
Developer
Developer
Posts: 798
Joined: Sat Jul 23, 2016 7:53

Re: Performance drop

Post by dpJudas »

+gl_renderbuffers 0 disables all post processing steps (you shouldn't need to do that anymore after PR91 is merged, it will do it automatically for you).

Why you have a sudden perf drop I cannot say, but +gl_renderbuffers 0 effectively rules out that it has anything to do with the post processing stuff. Based on your description it sounds like it was something that changed between build 1905 and 1958.
User avatar
Graf Zahl
GZDoom Developer
GZDoom Developer
Posts: 7148
Joined: Wed Jul 20, 2005 9:48
Location: Germany
Contact:

Re: Performance drop

Post by Graf Zahl »

The reason for this is that in the recent builds shaders are always on, and it's very clear that this hardware cannot deal with it.
User avatar
Graf Zahl
GZDoom Developer
GZDoom Developer
Posts: 7148
Joined: Wed Jul 20, 2005 9:48
Location: Germany
Contact:

Re: Performance drop

Post by Graf Zahl »

This should be better with the next build. I again disabled shaders for such old hardware and fixed the issues that prevented that code path from working.
drako
Posts: 18
Joined: Wed Aug 10, 2016 19:28

Re: Performance drop

Post by drako »

Ok, now (build 2105) the performance is 16 / 200 . It runs without the parameter. So it is good. Is 200 an fps cap in this build?
User avatar
Graf Zahl
GZDoom Developer
GZDoom Developer
Posts: 7148
Joined: Wed Jul 20, 2005 9:48
Location: Germany
Contact:

Re: Performance drop

Post by Graf Zahl »

Yes. ZDoom's default framerate capping feature was added recently and this defaults to 200.
drako
Posts: 18
Joined: Wed Aug 10, 2016 19:28

Re: Performance drop

Post by drako »

I have not been here for a while. I have just tested x64 build 2.5pre-281. I get about 80fps in this treetest map. I do not know what you did but this is a huge improvement. Thanks a lot.
EDIT: Today I run gzdoom and I cannot get 80 fps anymore. I get just 16 again. That is very strange...
Locked

Return to “Closed Tech Issues”