Waterfalls display incorrectly
Posted: Sun Mar 17, 2013 3:44
Hi,
I do apologise if this bug has been covered elsewhere, or by a more basic technical name but I have looked in the forums and can't seem to find it so here goes.
Basically the waterfall textures don't seem to display correctly. Instead of flowing water, I simply see what appears to be the texture of the large skull with glass eyes and a lever moving across the surface, but animated in a flowing manner as though suggesting water.
Below is my graphics and computer specs as requested.
Many thanks!
Card name: ATI Radeon HD 4600 Series
Manufacturer: Advanced Micro Devices, Inc.
Chip type: ATI display adapter (0x9490)
DAC type: Internal DAC(400MHz)
Device Key: Enum\PCI\VEN_1002&DEV_9490&SUBSYS_20031787&REV_00
Display Memory: 2297 MB
Dedicated Memory: 1018 MB
Shared Memory: 1279 MB
Current Mode: 1920 x 1080 (32 bit) (59Hz)
Monitor Name: Generic PnP Monitor
Monitor Model: PLE2208HDS
Monitor Id: IVM560A
Native Mode: 1920 x 1080(p) (60.000Hz)
Output Type: HD15
Driver Name: aticfx32.dll,aticfx32.dll,atiumdag.dll,atidxx32.dll,atiumdva.cap
Operating System: Windows 7 Home Premium 32-bit (6.1, Build 7601) Service Pack 1 (7601.win7sp1_gdr.130104-1431)
Language: English (Regional Setting: English)
System Manufacturer: System manufacturer
System Model: System Product Name
BIOS: BIOS Date: 12/19/08 17:07:50 Ver: 08.00.14
Processor: AMD Phenom(tm) II X4 920 Processor (4 CPUs), ~2.8GHz
Memory: 4096MB RAM
Available OS Memory: 3072MB RAM
Page File: 1818MB used, 4322MB available
Windows Dir: C:\Windows
DirectX Version: DirectX 11
DX Setup Parameters: Not found
User DPI Setting: Using System DPI
System DPI Setting: 96 DPI (100 percent)
DWM DPI Scaling: Disabled
DxDiag Version: 6.01.7601.17514 32bit Unicode
I do apologise if this bug has been covered elsewhere, or by a more basic technical name but I have looked in the forums and can't seem to find it so here goes.
Basically the waterfall textures don't seem to display correctly. Instead of flowing water, I simply see what appears to be the texture of the large skull with glass eyes and a lever moving across the surface, but animated in a flowing manner as though suggesting water.
Below is my graphics and computer specs as requested.
Many thanks!
Card name: ATI Radeon HD 4600 Series
Manufacturer: Advanced Micro Devices, Inc.
Chip type: ATI display adapter (0x9490)
DAC type: Internal DAC(400MHz)
Device Key: Enum\PCI\VEN_1002&DEV_9490&SUBSYS_20031787&REV_00
Display Memory: 2297 MB
Dedicated Memory: 1018 MB
Shared Memory: 1279 MB
Current Mode: 1920 x 1080 (32 bit) (59Hz)
Monitor Name: Generic PnP Monitor
Monitor Model: PLE2208HDS
Monitor Id: IVM560A
Native Mode: 1920 x 1080(p) (60.000Hz)
Output Type: HD15
Driver Name: aticfx32.dll,aticfx32.dll,atiumdag.dll,atidxx32.dll,atiumdva.cap
Operating System: Windows 7 Home Premium 32-bit (6.1, Build 7601) Service Pack 1 (7601.win7sp1_gdr.130104-1431)
Language: English (Regional Setting: English)
System Manufacturer: System manufacturer
System Model: System Product Name
BIOS: BIOS Date: 12/19/08 17:07:50 Ver: 08.00.14
Processor: AMD Phenom(tm) II X4 920 Processor (4 CPUs), ~2.8GHz
Memory: 4096MB RAM
Available OS Memory: 3072MB RAM
Page File: 1818MB used, 4322MB available
Windows Dir: C:\Windows
DirectX Version: DirectX 11
DX Setup Parameters: Not found
User DPI Setting: Using System DPI
System DPI Setting: 96 DPI (100 percent)
DWM DPI Scaling: Disabled
DxDiag Version: 6.01.7601.17514 32bit Unicode